Estes Vanguard Eagle, Kit # 2193, Part 2, Engine Mount

With a short BT-20 tube it doesn't make much sense to push and engine block into a bead of glue from the bottom. Then the engine hook is set into the cut slit. The instructions at the right show how they recommend it being done.

TIP: Slide the engine block in (dry) from the top and against the upper bend of the engine hook. Apply a bead of glue around the top joint of the engine block. You can use an engine casing to help keep the block set straight. After the glue sets up the casing is removed.

Take a look at the centering rings - plastic!

Below the centering rings is the display nozzle plate and nozzles.