Sunday, April 24, 2011

DFR Tech Delta II Build Part 14 Prepared Sub-Assemblies

Here's everything ready for the final assembly.
Depending on the model, I'll build in sub-assemblies.

When starting a build, look ahead to the finishing and decide if it's easier to pre-paint the components.

On the Delta II, I wanted complete spray coverage on all the inside areas. All parts (SRMs) were filled, primed, masked and sprayed off the model.

When building this way you do have to mask all strips and surfaces that will be glued together. All this was covered in the previous post.

No comments:

Post a Comment