Refinishing the Centurion Part 2

The nose cone smilies were filled with the CWF mix of 4 parts CWF to 1 part water.

Here it is after sanding to surface.



After sanding the fillet areas, epoxy fillets were added.

The fins were sanded removing some of the original white paint. I didn't go near to the bare wood. I sanded right over the decals figuring the primer would help remove any decal step that might be left.

Look close at the outside edge of the fins and you can see why I wanted to refinish this one. The gray primer really shows off the rough, beaten up edges.