Saturday, December 15, 2012

Dr. Zooch Saturn V Build Step 3 Fairings Part 1

The Step 3 illustration shows the Zooch Ant cutting the fairings on the outside lines. I cut mine a little outside the lines.

When they are glued onto the BT-20, you'll cut through both the fairing card stock and tube at the same time.

                 



It helps to pre-curve the fairing stock before gluing on the BT-20 tube.








As they are glued onto the tube, roll down the ends with a clean, smooth dowel.







To get an even pressure while drying, copy paper was tightly wrapped and taped over the glued fairings.

No comments:

Post a Comment