FlisKits Triple Threat Build Part 2 Fins

The fins on this kit are well printed on self adhesive stock.
You cut out the fins, peel off the backing and apply to the balsa.

The instructions tell you to cut out the fins outside the lines (leaving a border) on the left side print. You do cut on the leading edge. (no border here) This leading edge is placed on the edge of the balsa sheet.

The prints were a little confusing, they don't show any border on the root edge. The border line is shown on the leading edge. No big deal, I made the adjustment.

Here is how I cut the fin plates, the leading edge now has no border.

I added a border to the root edge.