Wednesday, February 13, 2013

MPC Taurus - 1 Build Part 7 Fin Gluing

These fins are small! I haven't built a BT-5 based model for a while.
The trailing edges are flush with the end of the body tube.
You've got nothing to line up the back on, the fin covers the pencil line.
Extend the fin lines over the back end around the base edge of the tube.


I'm not sanding the back end of the tube.
I'm checking to make sure the tailing edges are in line and flush with the end of the tube.
Set your model on a flat surface (here a sanding block) and hold up to a light.

No comments:

Post a Comment