Tuesday, June 10, 2014

Mega Mosquito Build Part 6, Launch Lugs and Fillets




The 1/4" diameter lug seams were filled before gluing on the model.

The two lugs were big enough to use two Q-tips for a handle.



I don't have a 1/4" rod to line up the lugs.
A 1/4" rod would probably be to heavy to use like this anyway.

Instead, the aluminum was used to check the two lugs.





I always roll the glue fillets around the front end of the lugs.

Roll the cotton end of the Q-tip between your thumb and index fingers and shape it to more of a point. With the end a little smaller you can pick up or roll over the glue fillet at the end of the lugs.

No comments:

Post a Comment