Saturday, July 2, 2011

ASP Micro Wac Corporal Build Part 10 Tiny Tim Booster

The other end of the clear tube is glued 3/4" in the lower Tiny Tim booster.
I placed a wrap of tape at the 3/4" mark for a "stop".

Some medium thickness CA was set in the booster tube and the clear tube slid in place up to the tape wrap. The tape was removed.

Three 1/2" lengths of thinner half round are cut.
The instructions say to set them on double sided tape and spray them black.
I took the easy way out and used a permanent marker to color them.

No comments:

Post a Comment