ASP Corporal Build, Part 11, White Paint & Trim

After the primer, the model was shot with Rustoleum 2X Gloss white.
With Florida Summer humidity, It took three days to dry.

Wet sanding with 400 grit followed and the heavier finish coat.

I rarely work with vinyl trim. I'm going to take my time with the upper body roll pattern wrap, it's a "one shot".
Here's how it sits on the upper section with the small squares at the bottom.

To apply the vinyl, you peel off the heavy back layer.
You have to peel this off, back onto itself so you don't lift the black vinyl.

Don't touch the sticky vinyl or allow any dirt to get on it.

With the opaque white positioning layer it would be hard to line up along the body tube edge.
I cut off the excess along the bottom of the squares with scissors.