Sunday, January 26, 2014

Estes Hornet Build Part 4, Launch Lug and Nose Cone Filling

TIP: To save time on later builds,
I went head and filled four 3/16" lugs at the same time.

Four lugs were slid down a dowel and tape was placed over the ends to keep them in place.
CWF filler was brushed over all the lugs at the same time.




The filler on the nose cone shoulder is sanded even with the body tube.
Sand carefully so you are just removing the filler and not sanding down the body tube.

No comments:

Post a Comment