Wednesday, January 25, 2017

Estes Galactic Taxi #1914 Build Part 7, Primer and Sanding

The balsa pieces were filled with CWF and sanded smooth.
Here they were taped to cardboard for a shot of primer/filler.

Shoot one side and let dry.
You can flip them over and stick them down to the same piece of tape to spray the other side.

Here's the body tube and nose cone after the primer/filler was sanded to surface. You can see where the primer/filler is left in the seams and small recesses left after the CWF filler.

The fin positions are marked.
The primer filler will be scraped off where any gluing will be done.

No comments:

Post a Comment