The decals were printed small and the top wrap didn't go completely around the body tube.
A strip of paper was wrapped around the body tube to get the circumference. That length was used to get the decal wrap close to the original length.
I hadn't sealed the decals so they were easy to lift.
Here's the new decals, a near perfect fit. Look close and your see there is a bit of clear extending over the top of the body tube.
After the decal dried the clear overlap was trimmed off with a razor blade after the decal dried.
I used a Sharpie marker around the nose cone shoulder lip so no white plastic would show with it slid into the body tube.
No comments:
Post a Comment