You'll need 12 nozzles, I made more.
I'll pick the best ones and group them into sets of four.
TIP: Keep your small parts in zip-lock bags until you need them
I rolled a piece of tape sticky side out to do a test fit.
I set it below the instruction illustration.
To be sure I got the size right, an elnlarged picture of the taped assembly was set below the drawing. The top nozzle is the right length, the other three will be shortened at the narrow end. This will give a slightly larger gluing area.
Build time this post: 1 hour, 15 minutes
Total build time so far: 38 hours, 30 minutes
No comments:
Post a Comment