Estes Teros Upscale, Part 8, Fins

On one piece I had a chip on the trailing edge.
When gluing the two piece lamination, I'll turn this chipped side in to the center to the filler will stay in place better.

Here's one of the rare occasions I used yellow wood glue.
I didn't lay it on too thick I don't want the lamination to slip around.
Just be sure to get glue near the outside edges.
The fins were set under heavy books to dry.

I checked the fins and the edges were warping and lifted.
I pinched the open edges together and closed them with thin CA.