AVI Nike Tomahawk Build Part 15 Nose Cone and Fin Units

After getting the adapter close, time to prepare the plastic parts.

The top 20mm plastic nose cone is how it comes direct from Quest.

The bottom nose cone has had the seams sanded down and the tip tapered to a more scale profile.

The Tomahawk fin units are very clean, except for the outside edges.

The top unit shows a little molding flash on the right fin.

The bottom unit has been cleaned up with 220 then 400 grit on sanding blocks.
The yellow coupler joins the fin unit to the upper 20mm tube.

Finishing of the Nike Tomahawk will be continued when I return home.
I'm on a cruise until October 3!

The next build turned out to be more interesting than I had thought -
the Estes Mk109 Stingray.