Some use water to allow repositioning, I prefer just to stick them down off the sheet.
The rear most band is too wide with the clear edges!
I was right, it is wide enough to cover the rough seam.
Note all the band decals will start and finish in line with one fin.
I returned it to the backing sheet to trim off the clear sides.
Use a sharp knife and straightedge and trim to the black borders.
There is one band above the fins without a black border.
A wrap of masking tape was placed above the red band location to give a straight edge for alignment.
If you can help it, you don't want to lift and re-apply self adhesive decals!
No comments:
Post a Comment