Saturday, October 22, 2016

Semroc (Estes) Starship Excalibur Build, Part 23, Cleaning Up The Lugs

There was a rough edge on one side of the launch lug opening.
While the first white undercoats were not totally dry, a sharpened dowel was turned in the end, re-rounding the lug.

The front lug antenna housing needed some cleaning up. The sides weren't totally square.

The side of my knife was set against the flat opening compressing the balsa and paint.

Here's the cleaned up opening.
The picture is distorted, the antenna and square opening are centered.

No comments:

Post a Comment