Sunday, July 16, 2017

Card Stock Fix TIP

I glued together the "fins" on the Flying Porta Pad with a glue stick. After the first flight one of the glue surfaces started to lift.

Before I'd squirt a drop of glue in the opening and try to spread it out with a knife blade.
This time I ran a line of glue down the edge of a scrap piece of card stock. The glued edge was slipped into the gap. Moving the card stock back and forth I was able to get a more even glue coat inside.
The sides were held with long tweezers until it set up.

No comments:

Post a Comment