To go to the Firefox website, CLICK HERE
Scroll down a bit and look for "SECPLEL" in green color.
Now you can make electric igniters that require NO SOLDERING OF BRIDGEWIRES TO LEADS yet will ignite reliably using as little as a 9 volt "transistor" battery up to and including 12 volt automotive and every DC voltage in between!
Simply strip 3/16" of insulation from lead wires and dip into the primer slurry - allow to dry and use as is or dip them again in your favorite match composition/pyrogen.
Make 50 to 100 igniters per hour for as little as 5 cents each - with no soldering!
Our procedure allows you to use your lead wires over and over saving you money and time. Each bottle comes with complete instructions and enough primer and binder to make up to 400 igniters (allowing for 10-15% as waste).
Liquid Element™ acts as both primer/booster and pyrogen! Basically foolproof!
This is our most popular selling pyrogen kit for over 15 years!!
SECPLEL - ELECTRIC IGNITER PYROGEN/PRIMER
Non-hazmat shipping- No ATFE required to order.
$18.50/bottle, before shipping charges (3oz/bottle)
I find myself wondering if you need 9 volts for a small igniter; heat may spike faster with less material. It would be worth testing.
ReplyDeleteI'm considering doing just that. I have a lot of scrap Category 5 network cable that could be used to make nice Q2G2-like igniters with the application of this stuff. If I do it, I'll do a full test and report the results on my website.