After the first shot of gloss white there was still some M&TG "boogers" around the launch lug and fin fillets.
These were knocked down with some 400 grit, see inset picture.
The color separation line is right at the end of the launch lug, not an easy mask.
I started the tape mask in the crux of the lug fillet.
After the entire wrap was in place and trimmed, a second piece of tape was set over the end of the lug.
A piece of copy paper was wrapped over the top of the body tube and masking tape was set over the previous Scotch tape line.
Now the gloss purple is shot.
No comments:
Post a Comment