Estes V2 Build Part 23 Gluing the Servo Pods

Use the card stock template again to double check the positioning.
It won't take much glue to tack the pods in place, don't glue the template onto the fin.

Initially, only four pods were glued on just the left sides of the fins.

The right side of the pods were glued on by looking down the fin edges and lining up the second pod on the other side.

The picture shows both pods glued to one fin looking straight down the outside edge. (Inset picture on left.)
On the right side of the picture are both pods viewed from the rear.

Still, double check the position again with the card stock template.